Dantherm Cooling PS060100B - Design Data: General Performance; Maintenance

Page 10 of 14
7. DESIGN DATA: GENERAL PERFORMANCE
Model #
Watts/°F
Voltage
Hz
Ph
Full load,
Amps
Minimum
breaker/fuse
size, Amps
Approx.
Weight
(lbs/Kg)
PS018017Y
17
24VDC
N/A
N/A
3.5
4.4
21/9.5
PS018017Z
17
48VDC
N/A
N/A
1.75
2.25
21/9.5
PS023017A
17
115VAC
50/60
1
0.5
0.7
21/9.5
PS023017B
17
230VAC
50/60
1
0.3
0.4
21/9.5
PS023017Y
17
24VDC
N/A
N/A
3.5
4.4
21/9.5
PS023017Z
17
48VDC
N/A
N/A
1.75
2.25
21/9.5
PS023022A
22
115VAC
50/60
1
0.5
0.7
23/10.4
PS023022B
22
230VAC
50/60
1
0.3
0.4
23/10.4
PS023022Y
22
24VDC
N/A
N/A
3.5
4.4
23/10.4
PS023022Z
22
48 VDC
N/A
N/A
1.75
2.25
23/10.4
PS023026Z
26
48VDC
N/A
N/A
1.75
2.25
36/16
PS035035A
35
115VAC
50/60
1
3.4
6
59/27
PS035035B
35
230VAC
50/60
1
0.86
2.5
59/27
PS035035Z
35
48VDC
N/A
N/A
4.3
6
59/27
PS035045A
45
115VAC
50/60
1
3.4
5
64/29
PS035045B
45
230VAC
50/60
1
1.86
2.5
64/29
PS035045Z
45
48VDC
N/A
N/A
4.3
6
60/27
PS035055A
55
115VAC
50/60
1
3.4
5
72/33
PS035055B
55
230VAC
50/60
1
1.86
2.5
72/33
PS035055Y
55
24VDC
N/A
N/A
10.0
12.5
68/31
PS035055Z
55
48VDC
N/A
N/A
4.3
6
68/31
PS060100B
100
230VAC
50/60
1
1
1.5
135/62
*The information provided above is a general overview for reference only. The customer is
responsible for the correct installation and application of each product. As products and features
change, the nameplate on the side of the unit should be referred to for correct voltage / current
during installation.
8. MAINTENANCE
The Heat Exchanger should be examined periodically to determine the required cleaning periods based
on the installed environmental conditions. Annual inspections are most typical and will cover the
majority of installed locations.
CAUTION! Always disconnect power to Heat Exchanger prior to servicing. Scheduled maintenance
includes cleaning of fans and Heat Exchanger core as they become contaminated with dust or residue.
The fans and Heat Exchanger core should be cleaned using a soft bristle brush to remove dust or
debris. Water is NOT recommended. Reconnect power after service.
8.1. Wiring Diagrams
The following schematics are of standard products only. Wiring schematics of options or
custom products is available directly from Dantherm Air Handling, Inc.
Dantherm Cooling , Inc. Heat Exchanger Operating & Maintenance Manual
HexFlow Pinnacle Series Product Information Manual