Dantherm Cooling PS060100B

Need help?

Do you have a question about the Dantherm Cooling PS060100B and is the answer not in the manual?

Summary

General Safety & Warning Instructions

Unpacking, Handling & Initial Inspection

Inspect unit on delivery for damage, maintain upright position, retain packaging for claims.

Model Identification

Speed Control (-S) Option

Controls fan speed at lower temperatures for noise/energy reduction and provides alarm signals.

Thermostat Control (-T1) Option

Controls external fan operation based on ambient temperature, turning it on above 80F and off below 60F.

Product Drawings

Cut Out and Mounting Diagrams

Provides detailed dimensions and diagrams for cutting and mounting the heat exchanger units.

PS018 XXX-XX Series Mounting

Provides cut-out and mounting dimensions for the PS018XXX-XX model series.

Older PS023011;017;022-XX Series Mounting (Pre-2008)

Details mounting dimensions for older PS023011/017/022-XX series units manufactured before 2008.

PS023011;017;022-XX Series Mounting (2008-On)

PS023026-XX Series Mounting

PS035 XXX-XX Series Mounting

PS060 XXX-XX Series Mounting

Mounting of Unit to Enclosure & Operation

General Mounting and Connection Procedures

Covers enclosure checks, gasket installation, cover removal, lifting, mounting hook, hardware, and electrical connection.

Speed Control Unit (PS0 XX0 XX-XX-S) Test Procedure

Return Material Authorization Procedure

RMA Process and Required Information