Need help?Do you have a question about the Dantherm Cooling HEXFLOW PINNACLE Series and is the answer not in the manual?
General| Brand | Dantherm Cooling |
|---|---|
| Model | HEXFLOW PINNACLE Series |
| Category | Industrial Equipment |
| Language | English |
Explains the alphanumeric code used to identify unit models based on series, height, capacity, and voltage.
Details the function of the speed controller for fan operation to reduce noise and energy consumption.
Describes the operation of the external loop fan based on temperature settings, turning on above 80F and off below 60F.
Illustrates the overall physical layout, airflow paths, and component locations of the heat exchanger unit.
Provides various diagrams for unit cut-out and mounting dimensions across different model series.
Provides specific dimensions and cut-out details for PS018XXX-XX model series.
Details cut-out and mounting information for older specific model series manufactured before 2008.
Presents cut-out and mounting specifications for newer 2008+ PS023011/017/022-XX models.
Provides cut-out and mounting dimensions for the PS023026-XX model series.
Offers cut-out and mounting details for the PS035XXX-XX model series.
Displays cut-out and mounting information for the PS060XXX-XX model series.
Refers to schematics for standard products, with custom options available separately from Dantherm Air Handling.
Illustrates the AC voltage wiring connections for all applicable models (11/17/22/35/45/55/100).
Shows the DC voltage wiring for Y/Z models without speed control (11/17/22/35/45/55).
Depicts DC voltage wiring for specific models with HX2 speed control, up to batch date 130601.
Details DC voltage wiring for specific models with HX2 speed control, from batch date 130601 onwards.
To Next Page
