Dantherm AC-M5 W MKII User Manual

4
General information
Introduction
This section gives the general information about this service manual and about the unit.
Manual, part
number
Part number of this service manual is 062367.
Target group
The target groups for this service manual are the:
• Users of the unit
• Technicians who install and maintain the unit
Copyright Copying of this service manual, or part of it, is forbidden without prior written permission
from Dantherm Air Handling A/S.
Reservations Dantherm Air Handling A/S reserves the right to make changes and improvements to
the product and the service manual at any time without prior notice or obligation.
EC-Declaration of
Conformity
Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive hereby declare that the
units mentioned below:
AC-M5 W MKII, product no. 322036:
are in conformity with the following directives:
2006/42/EEC Directive on the safety of machines
2006/95/EEC Low Voltage Directive
2004/108/EEC EMC Directive
97/23/EEC The Pressure Equipment Directive
94/62/EEC Packaging Directive
- and are manufactured in conformity with the following harmonized standards:
EN 12100 Machine Safety
EN 60 335-1 Low Voltage
EN 60 335-2-40 Low Voltage
DEF-STAN 59-411,
part 3 Land Class C Military EMC Standard
EN 378 Refrigeration systems
Skive, 16.09.2009
Recycling The unit is designed to last for many years. When the time comes for the unit to be re-
cycled, the unit should be recycled according to national rules and procedures to pro-
tect the environment.
Quality Manage-
ment System
Dantherm Air Handling A/S has implemented a Quality Management System according
to EN/ISO9001. The system is supplemented with an Environmental Management Sys-
tem according to EN/ISO14001. Both systems are third-part approved and certified, by
Bureau Veritas Certification.
During 2005 & 2006 the Management Systems are supplemented with business-
routines with regards to Safety. These routines fulfil the requirements stated in the in-
ternational standard for Safety Management Systems OHSAS18001.

Dantherm AC-M5 W MKII Specifications

General

Brand	Dantherm
Model	AC-M5 W MKII
Category	Air Handlers
Language	English