Need help?Do you have a question about the Dantherm cdp 125 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Capacity | 125 L/day |
| Airflow Capacity | 125 l/s |
| Airflow | 900 m³/h |
| Power Supply | 230 V / 1 ph / 50 Hz |
| Operating Temperature Range | 3°C to 32°C |
States conformity with relevant EU directives and standards.
Guidelines for proper recycling of the unit and its components.
Explains the condensation principle of operation for the unit.
Covers fan, compressor, pressostat, and thermal relay functions.
Explains the meaning of different LED combinations and indicators.
Explains how push buttons control functions like dehumidification and heating.
Prepared for external hygrostat and thermostat connections.
Unit features passive, demand-related defrosting using a sensor.
Covers unit placement options and condensate outlet requirements.
Details top air outlet, inspection side change, and duct connection.
Covers fresh air, heating coils, condenser, power, and water quality.
Covers monthly and annual service procedures for the unit.
Describes how to access and service internal components.
Table listing faults and their corresponding solutions.
Shut down the unit immediately if not functioning correctly.
Contact service technician or representative if fault is not found.
Provides detailed technical specifications for CDP models.
Covers hotline, preventive maintenance, repair, and partner network.
Contact details for Henrik Hersted for more information.
To Next Page
