What to do if Dantherm Fan drain is blocked?
If the drain is blocked in the pipe or drip tray inside the Dantherm Fan unit, check that the drain is not blocked and clean it with water and detergent if required.
How to secure Dantherm Fan front cover?
If the styrene front cover and/or the plastic panel on the drip tray have been unscrewed from the Dantherm Fan unit and not replaced securely enough, check that the plastic panel on the drip tray and styrene front cover have been installed correctly so that they are completely airtight and watertight.
How to adjust Dantherm Fan airflow?
If the Dantherm Fan unit may be running with too high a level of air replacement for the size and use of the house, check that the unit's airflow is appropriate to the size and use of the house by checking the unit's airflow according to the initial adjustment procedure.
Why is my Dantherm Fan causing a dry climate?
If the Dantherm Fan unit has been manually set to operate with the nominal air replacement (Fan Step 3) in Manual Mode, it can cause very dry indoor climates, particularly in winter when the outside air is very dry. Set the unit to Automatic Mode or turn the unit down to Fan Step 2 or 1 in Manual Mode. Using Fan Step 2 or 1 is only recommended for a short period.
Why does Dantherm Fan display turn off?
The Dantherm Fan is functioning correctly.
General| Brand | Dantherm |
|---|---|
| Model | HCV 3 |
| Category | Air Handlers |
| Language | English |
To Next Page
