DAPAudio K-115 - Device Description and Overview; Features; System Overview

5
Description of the device
Features
The K-115 is a 15" 2-way Fullrange speakersystem:
• 15/1 passive plastic vented PA speaker system
• Woofer: 15”, 8 Ohm
63 mm Voice Coil
• High Driver: 1.375” Titanium Dome, 8 Ohm,
63 mm Voice Coil
• Nominal Impedance: 8 Ohm
• Power Handling: 225 Watt Continuous
450 Watt Program
900 Watt Peak
• Freq. Response (-3 dB): 60Hz – 16.000 Hz
• Freq. Range (-10 dB): 45Hz – 20.000 Hz
• Sensitivity (Full Space): 96 dB / W / m
• Peak SPL at 1 m (Theoretical): 125.5 dB
• Nominal Dispersion (H x V): 65° x 65°
Overview
Fig. 1
Installation
Remove all packing materials from the K-115. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.
Do not supply power before all components of the system are set up and connected properly.