Need help?Do you have a question about the DAPAudio Qi-4200 and is the answer not in the manual?
Lists essential attributes of the Qi-series amplifiers, including amplifier class, channel count, output connectors, and built-in limiter.
Details the front panel layout, identifying PROTECT.LIMIT.SIGNAL LEDs, gain controls, air intake grill, and the power switch.
Illustrates and describes rear panel connectors: IEC power input, Speakon speaker outputs, and 3-pin XLR balanced inputs.
Instructions for unpacking, checking for damage, and fitting the equipment into a rack, emphasizing safety during installation.
Guidance on verifying power supply voltage, installing on a flat surface, and connecting components before powering the unit.
Detailed explanation of front panel elements: PROTECT, LIMIT, SIGNAL LEDs, gain control, and the power switch with its LED indicator.
Explanation of rear panel connectors and mode switches for stereo, mono, and bridge operations for channels 1-2 and 3-4.
Illustrates connection diagrams for stereo, mono, and bridge modes, including notes on impedance and switch settings.
Guidance on caring for audio cables and examples of unbalanced and balanced connection configurations using TRS and XLR connectors.
Instructions for keeping the unit clean using a damp cloth, emphasizing disconnecting power and avoiding liquids or solvents.
Step-by-step guide to diagnose and resolve common operational problems, advising to unplug and check connections before returning.
Detailed specifications for Qi-4200, Qi-4400, and Qi-4600 models, covering rated power, performance, controls, inputs/outputs, and construction.
Diagrams showing the physical dimensions of the amplifier unit in millimeters and rack units (19 inch x 1HE).
Lists essential attributes of the Qi-series amplifiers, including amplifier class, channel count, output connectors, and built-in limiter.
Details the front panel layout, identifying PROTECT.LIMIT.SIGNAL LEDs, gain controls, air intake grill, and the power switch.
Illustrates and describes rear panel connectors: IEC power input, Speakon speaker outputs, and 3-pin XLR balanced inputs.
Instructions for unpacking, checking for damage, and fitting the equipment into a rack, emphasizing safety during installation.
Guidance on verifying power supply voltage, installing on a flat surface, and connecting components before powering the unit.
Detailed explanation of front panel elements: PROTECT, LIMIT, SIGNAL LEDs, gain control, and the power switch with its LED indicator.
Explanation of rear panel connectors and mode switches for stereo, mono, and bridge operations for channels 1-2 and 3-4.
Illustrates connection diagrams for stereo, mono, and bridge modes, including notes on impedance and switch settings.
Guidance on caring for audio cables and examples of unbalanced and balanced connection configurations using TRS and XLR connectors.
Instructions for keeping the unit clean using a damp cloth, emphasizing disconnecting power and avoiding liquids or solvents.
Step-by-step guide to diagnose and resolve common operational problems, advising to unplug and check connections before returning.
Detailed specifications for Qi-4200, Qi-4400, and Qi-4600 models, covering rated power, performance, controls, inputs/outputs, and construction.
Diagrams showing the physical dimensions of the amplifier unit in millimeters and rack units (19 inch x 1HE).
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Input Impedance | 20kΩ |
| Protection | Thermal, Short Circuit, DC, Overload |
| Connectors Input | XLR |
| Connectors Output | Speakon |
| Power Supply | 230V, 50 Hz |
To Next Page
