Need help?Do you have a question about the DARCHE DIRTY DEE and is the answer not in the manual?
Crucial preparation for the swag, including mattress expansion and recommended seasoning.
Unrolling the swag onto a flat area and identifying the correct pole sections for assembly.
Feeding the angled middle pole through the sleeve on top of the swag and centering it.
Connecting an end section pole into the middle section pole's sleeve.
Inserting the first pole end onto the base pin and ensuring it is securely fitted.
Connecting the second pole end to the middle section, with important notes on tensioning.
Attaching the swag clips to the assembled composite poles, alternating sides for even tension.
Inserting and extending trigger lock spreader poles to shape the swag and lock into position.
Partially closing zips, doors, and window flaps to allow air escape during rolling.
Tightly rolling the swag from the head end to expel air, then securing with compression straps.
Instructions for soaking and drying the swag to enhance weather protection and fill stitching holes.
Guidelines for cleaning, drying, and storing the swag to prolong its lifespan.
Tips to minimize condensation by allowing airflow in confined spaces during cold weather.
To Next Page
General