DARCHE DIRTY DEE - Step 4: Securing First Pole; Step 5: Connecting Second Pole

4
INSTRUCTION MANUAL
Step 5
Insert the second END pole to the other end of the MIDDLE section angled pole sleeve. Place your palm under the
pole end, and push upward until there is a gap between the pole end and the second pin. Insert the second pin.
DUSK TO DAWN
IMPORTANT: DO NOT BEND THE POLE TO INSERT THE SECOND PIN.
Repeat this process for the other two poles whilst correcting the swag skin as you assemble.
Step 4.
Insert the first pole end onto the base pin.