DARCHE.COM.AU
Step 7
Clip the swag to the composite poles one end at a time. A good technique for attaching the clips is to alternate from
one side to the other. Top left then top right, second left and then second right and so on.
1
2
3
4
5
6
At this point you should have all three composite poles assembled, located in their corresponding positions and
have centralised the swag at each point. The clips should all be attached to the composite poles on each side.
Stretch out the base of the swag to ease assembly when placing the trigger lock spreader poles.
HEAD
CENTRE
FOOT
To Next Page
Loading...
