DARCHE NEBULA 1550 - Set Up Instructions

SET UP INSTRUCTIONS
1
5
7
9
6
8
10
Select a well drained, clean and level surface.
Unroll into your desired position.
Set up the ridge pole C (1 piece) and place one end
through the eye in the apex of dome pole A.
Starting from the middle top, clip the canvas shell to
dome poles A and B.
Insert poles D (2 pieces) into the ends of
the ridge pole.
4
Secure to the ground using a peg in each pin and
ring, and four corner leaf peg points.
Repeat this process, place the other end of the ridge
pole through the eye in the apex of dome pole B.
Clip the roof to the ridge pole C.
Attach the eyelet at the end of the adjustable
awning strap to the end of poles D. Tighten
awning straps so the roof is taut.
3
Place the ends of both dome poles A and B into
their relevant pin and rings.
10
9
Next page - installing the y
2
Assemble the frame – ‘Set up’ the two dome poles
A and B.
A
B
A B
D
C