page title ∙ 1110 ∙ Using Your Chef Series Digital Blender
USING YOUR CHEF SERIES DIGITAL BLENDER
• Clean your blender and all of its parts prior to rst use. DO NOT SUBMERGE THE MOTOR
BASE IN WATER OR ANY LIQUID. MAKE SURE THE BLENDER IS UNPLUGGED.
• Read the entire instruction manual and save for further use.
• Remove any stickers and packaging before use.
• Use a wet cloth to wipe down the Motor Base.
• Wash the Tamper, Measuring Cup, Lid, and Pitcher with soapy water and a sponge. Use
a dish brush to clean the blades. Do not use your hands.
• Note: always make sure that the Lid is secure before blending. Keep hands and utensils
out of the Pitcher when in use.
• Place the Motor Base on a stable surface and plug in the appliance.
• Place the Pitcher on the Motor Base. When the Pitcher is secure, you should hear
a beeping sound.
• Place your ingredients into the Pitcher, making sure to add your liquid ingredients rst,
then powdered ingredients, then solid ingredients.
• Make sure the Lid is securely in place before engaging the appliance.
• Press the “Start/Stop” button to turn the blender on.
• You have the option to choose one of the pre-set Digital Dial modes, or to choose your
own speed and time setting. If you are choosing your own speed and time, set the Digital
Dial to the “Manual” setting (middle setting).
• Follow the “Blender Settings Guide” section to choose the right setting.
• Press the “Start/Stop” button again to start the blender.
• Use the Tamper to make sure all the ingredients are combined properly.
• After you are nished blending, unplug the blender.
• Clean the Pitcher immediately after each use.
• You can use the “Rinse” setting to make the cleaning process easier.
Before Using Your Chef Series Digital Blender:
To Next Page
Loading...
Need help?
General
