USING YOUR DASH popcorn MAKER
USING YOUR DASH popcorn MAKER
BEFORE FIRST USE
Clean the Lid and Measuring Cup with a non-abrasive sponge, towel or
cloth before using. Turn the Rotary Knob counterclockwise to remove the
stirring arm from the Rotary Knob.
Wipe Stirring Bar and Cooking Surface with a non-abrasive sponge, towel
or cloth. Install the Stirring Bar, make sure the Stirring Bar aligns with the
Rotary Knob, and tighten the Rotary Knob clockwise to secure.
NOTE: If using an extension cord, the marked rating of the cord should
be at least as great as the electrical rating of the Popcorn Maker. Use a
grounded 3-wire cord for grounded appliances.
Place the Popcorn Maker on a level surface and plug it in.
Place a small amount of vegetable oil on the Cooking Surface
according to chart on page 10 (photo A). Measure corn kernels in the
included Measuring Cup (photo B).
1
2
A
B
Cups of
popcorn
Amount
of oil
AMount of
popcorn
kernEls
Amount of
butter
8 1 tbsp ¼ cup 1 tbsp
16 2 tbsp ½ cup 2 tbsp
24 3 tbsp ¾ cup 3 tbsp
To Next Page
Loading...
Need help?
General
