13
4.0 CONTROLS
4.1 DAP III Microprocessor Control Panel
The standard controls on all Data Aire Series equipment is the DAP III microprocessor control panel.
This state-of-the-art control panel has a separate manual that goes into extensive detail regarding
functions, features, programming, and troubleshooting.
The DAP III microprocessor control panel has an entire manual dedicated to its use and
operation. This manual must be referenced to complete a thorough unit installation. Start-
up is not complete until the DAP III control panel settings are established.
4.2 Wiring Diagrams
Every Data Aire unit comes with a wiring diagram. These diagrams are ‘ladder’- type schematics
intended for service personnel. The intent is to allow the technician to understand the wiring details
associated with the electrical components and how they interface with the DAP III control panel as well
as peripheral equipment.
Data Aire’s chilled water unit wiring diagrams will have a drawing number which starts out with the
three letter designation, “DAC”. An example of a typical diagram, DAC-S-813, is shown on page 18.
To Next Page
Loading...
Need help?
General
