Data Aire DAMA-01 User Manual

Data Aire DAMA-01 Specifications

General

Brand	Data Aire
Model	DAMA-01
Category	Accessories
Language	English

Summary

1.0 Introduction and Storage Guidelines

1.1 Product Information and Model Identification

1.3-1.7 Inspection and Storage Procedures

2.0 Installation Procedures

2.1 Recommended Tools and Pre-Installation Planning

2.4-2.7 Room, Handling, and Unit Location

Covers space, handling, rigging, and selecting the unit's installation location.

2.8-2.11 Unit Mounting and Airflow Configurations

Details on mounting units with horizontal or vertical airflow configurations.

2.12-2.23 Piping, Connections, and Condensate Drain

Covers piping practices, line sizing, connections, and condensate drain systems.

2.26 Humidifier, Refrigerant Safety, Electrical, and Commissioning

Details on humidifiers, piping safety, electrical installation, leak testing, and commissioning.

3.0 Electrical Connections and Wiring

3.1 General Electrical Field Wiring Guidelines

Guidelines for running conduit, wire types, and connection checks.

3.2-3.5 Electrical Service, Ratings, and Voltage Tolerances

Covers electrical service, nameplate ratings, grounding, and voltage tolerances.

5.0 Refrigerant Charging Procedures

5.1-5.3 Evacuation, Dehydration, and Pre-Charging

Covers system evacuation, dehydration, tools, and general pre-charging guidelines.

5.5-5.6 Phase Checks and Line Set Calculations

Procedures for voltage phase checks and calculating refrigerant for line sets.

5.8 Charging Procedures and Refrigerant Handling

General procedures for charging, refrigerant handling, and split systems.

5.8.3-5.8.5 Compressor and Flooded System Charging

Detailed steps for charging compressors and flooded systems.

7.0 Control System Operation

7.2 Mini-dap4 Microprocessor Controller Functions

7.3 Optional Expanded dap4 Controller Features

8.0 Regular Maintenance Procedures

8.1 Air Filter Maintenance

9.0 Maintenance and Inspection Checklist

Compressor and Condenser Inspection