10-2014 gForce User Manual ● 73
Each component can be manually tested. Press the ENTER key to move the cursor to
the selected component. To change from Auto (automatic) to Man (manual) press the
DOWN key. To change from OFF to ON press the DOWN key.
Move the cursor to the title block by pressing the ENTER key stepping through all the
inputs. To return to the main Menu press the ESC key or to view the following screen
press the DOWN key.
The following screen will be displayed (values are for reference only):
Move the cursor to the title block by pressing the ENTER key stepping through all the
inputs. To return to the main Menu press the ESC key or to view the following screen
press the DOWN key.
The following screen will be displayed (values are for reference only):
To Next Page
Loading...
