56 ● gForce Ultra User Manual 10-2014
contact Data Aire engineering or service personnel.
8.1.5 Changing the Service Level Password
The Service Level password can be changed by doing the following:
Enter the Main Menu by pressing the MENU key. You will be prompted to insert the
Service Level password. Enter the current password.
• Press the MENU key. The screen will display the following display:
• Press the ENTER key. The cursor will highlight the first input. Change the input
by pressing the UP or DOWN key. Once the selected number is displayed, press
the ENTER key to move to the next input. Repeat the same steps for each input.
After the last input has been entered, press the MENU key to return to Main Menu. The
new password is stored.
8.2 Entering Menu Settings
NOTE:
The dap4™ control panel is used on a variety of Data Aire
equipment types including the gForce Ultra. Some Menus and Menu
screens will appear that are not applicable to the gForce Ultra. In this
document those Menu screens will be noted with the following message:
Disregard this Menu – it is not applicable to in row cooling units.
To Next Page
Loading...
