Data Aire gForce Ultra - Page 95

10-2014 gForce User Manual ● 95
Alarm # 4
SEE TAG INSIDE DOOR
CHECK HUMIDIFIER CYL
REHEAT INHIBITED
FAN MOTOR OVERLOAD
HUMIDIFIER INHIBITED
CUSTOM MESSAGE
REHEAT & HUM INHIBIT
POWER A OPERATING
UNIT IN STBY
POWER B OPERATING
UPS ON-CHK MAIN PWR
POWER A AVAILABLE
STANDBY PUMP ON
POWER B AVAILABLE
Once the selections have been made, with the cursor on the title line, Press the DOWN
key to advance to the next screen.
The following screen will be displayed (values are for reference only):
Alarm Output Function 1
Alarm 1
Alarm 2
Alarm 3
Alarm 4
CW Sensor
Yes or No
Yes or No
Yes or No
Yes or No
DA Sensor
Yes or No
Yes or No
Yes or No
Yes or No
Fan Ovld
Yes or No
Yes or No
Yes or No
Yes or No
Smoke
Yes or No
Yes or No
Yes or No
Yes or No
Cond Wtr
Yes or No
Yes or No
Yes or No
Yes or No
Firestat
Yes or No
Yes or No
Yes or No
Yes or No
Once the selections have been made, with the cursor on the title line, Press the DOWN
key to advance to the next screen.
The following screen will be displayed (values are for reference only):
Alarm Output Function 2
Alarm 1
Alarm 2
Alarm 3
Alarm 4
C1 Hi Pr
Yes or No
Yes or No
Yes or No
Yes or No
C1 Low Pr
Yes or No
Yes or No
Yes or No
Yes or No
C2 Hi Pr
Yes or No
Yes or No
Yes or No
Yes or No
C2 Low Pr
Yes or No
Yes or No
Yes or No
Yes or No
Short Cycl
Yes or No
Yes or No
Yes or No
Yes or No
Maint Tmr
Yes or No
Yes or No
Yes or No
Yes or No
Once the selections have been made, with the cursor on the title line, Press the DOWN
key to advance to the next screen.