Data East Batman - Page 6

Ql
...................
IO
Power
Supply"
Backbox Layout
Power
Supply.
Fuses
BR1.BR
8AS.B..
Capaci toi
PPB
-
*
Fuses
Controlled Lamps
-Digital Displays
Coils & Flash Lamps
-
L/R Power
—
Coils & Flash Lamps
CPU
Board
Sound
Board
PPB
Board
OD DO
DD
Display Board
—
Power Supply Board
Volume
Control 50VDC
(Inside Cabinet)
G.I. Fuses
All 5A S.B.
Playfield
Backbox Door
& Speaker Panel
7ASB
-
^
tl2VDC
+ 5VDC
F1F2F3F4
Backbox Door
DETAIL A
F6B3SZ83A
Playfield
&Coin Door
GAME ILLUSTRATION
7. Remove thè backbox keys from thè clip on thè inside of thè coin door and unlock and carefully remove thè
backglass. Set thè backglass aside.
8. Carefully remove thè playfield glass and set it aside.
9. Check all connectors in thè backbox for loose wire terminations. Reseat any loose wire by pushing in on thè
terminal.
10. Push on all connectors plugged intothe CPU board, Sound Board, Power Supply Boards, and (on Inserì board)
Display board to check that they are properly seated.
11. Check that thè fuses on thè Power Supply board, PPB board and fuse panel are seated properly.
12. Raise thè playfield and thè support bar on thè right side of thè cabinet; support thè playfield by inserting thè
support bar into thè countersunk notch on thè bottom side.
13. Check all cabinet cable and playfield lamp board connector terminations.
2
Game & Fe
ature Specifications