Data Count JR - Page 22

22
Problem Possible Causes Solution
Machine does not start
counting.
Display screen
shows(X=1 or 2):
or(X=1 or 2):
Something is
disrupting the
sensor’s detection
line.
Use compressed air to
clean the detector (see
chapter “Cleaning the
counting detectors”.*
Machine does not start
counting.
Display screen
shows(X=3 or 4):
Synchronization
problem.
Turn the machine off, wait
for 5 seconds and turn it
back on. *
Machine has stopped.
Display screen shows:
Bag was taken out
while machine was
working.
Manually pick up seeds
that have fallen out
through the machine’s
outlet.
Replace bag to continue
counting. *
* If problem persists, consult a qualified technician.
Clean Detector X
Place Cup or Bag
Call Service Er
X
Call Service Er
X