DLR-TL001 Functional Description
4 DLR-TL001
DLR-TL001 Functional Description
Main Features
• EPC C1G2 (ISO18000-6C) Compatible
• Frequency range: 860 MHz ÷ 928 MHz
• Read range: approx. 10m in air @ 2W ERP
• Unique TID plus long EPC code (512 bit)
• Memory capacity: 4k samples (8 Kbyte)
• Multiple programmable sampling interval
• Multiple programmable temperature thresholds
• Multiple programmable alarms
• Temperature Histogram function
• Mean Kinetic Temperature function
• Remaining Shelf Life function
• Easy to use manual interface
• Battery Life: 1 year min
• Temperature range: -10°C to 60°C
• Accuracy: ±0.5°C
• Dimensions: 107 x 107 x 6.6 mm3
• Enclosure degree of Protection IP67
• Battery charge status monitoring through RF or
manual interface
Operating States
DLR-TL001 tag behaves according to the following operat-
ing states:
Stand-by. Stand-by is the starting state of the tag. In this
state the tag responds to reader interrogations, the log
memory is empty and the internal clock has not yet
started. This is the lower power consumption state.
Idle. The tag is in Idle state when the internal clock is run-
ning, the memory is empty and the tag is waiting for a
start logging command. The start command can be issued
either by an RFID command or by the button.
Active. The tag enters the Active state after having
received the start logging command, in this state the tag
wakes up at defined intervals in order to acquire tempera-
To Next Page
Loading...