Datalogic DLR-TL001 - User Memory; User Memory Map

DLR-TL001 Memory Description
Quick Reference Guide 11
USER MEMORY
This bank contains all the configuration registers and the
logging memory. The total memory bank’s size is 8 Kbyte
(see next chapter for details), 220 bytes are needed for the
configuration and status register, 56 bytes are free for
user purposes and 7914 are allocated for the log area.
User Memory map
Here is reported the beginning and the tail of the USER
MEMORY table, that contains all the configuration regis-
ters and the logging memory.
You can find the full table in the Product Reference Guide
and in the Programming Manual.
The first 8 registers in the Table 4 below the main general
ones for the Logger application.
Table 4. User Memory Map
REGISTER ADDRESS OP. DEFAULT
CONTROL 0x0A RW 0x0010
SAMPLING_DELAY 0x0B RW 0x0E10
INIT_DATE_L 0x0C RW 0x0000
INIT_DATE_H 0x0D RW 0x0000
ETA_L 0x0E RW 0x0000
ETA_H 0x0F RW 0x0000
BIN_ENABLE 0x10 RW 0x0001
........................ ......... ... --
STATUS 0x51 RO --
USER_AREA_0 0x6E RW --
USER_AREA_1 0x6F RW --
........................ ......... ... --
USER_AREA_27 0x89 RW --
LOG_AREA_0 0x8A RO --
........................ ......... ... --
LOG_AREA_3956 0xFFE RO --