Datalogic Skorpio - Information Manual

SKORPIO HANDHELD INFORMATION
Please remove any protecve lm that may be covering the laser
screen window.
TOUCH SCREEN CALIBRATION
If the touchscreen is not responding properly to stylus touch taps, the
touchscreen may need to be recalibrated.
1. Tap the Start buon in the lower le corner of the system tray.
2. Select Sengs, then Control Panel.
3. Scroll the window if necessary and double tap the Stylus icon.
4. Select the “Calibraon” tab.
5. Tap the “Recalibrate” buon and follow the instrucons on the
screen.
SET DATE/TIME/TIME ZONE
1. Tap the Start buon in the lower le corner of the system tray.
2. Select Sengs, then Control Panel.
3. Scroll the window if necessary and double tap the Date/Time
icon.
4. Set the current date, me, and me zone.
5. Tap the Apply buon and close the screen.
SET TIME SEPARATOR
1. In Control Panel, select Regional Sengs.
2. Tap the Customize buon.
3. Select the “Time” tab.
4. Set the Time Style to “h:mm:ss ”
5. If the “Time Separator” is not the colon “:” character, select the Time Separator box.
6. Select the “:” character from the drop-down list (or type it in using the on-screen keyboard).
7. Tap the “OK” buon at the top of the screen.
SET SHORT DATE FORMAT
1. In Control Panel, select Regional Sengs.
2. Tap the Customize buon.
3. Select the “Date” tab.
4. Set the Short Date Style to “MM/dd/yyyy”.
5. If the “Date Separator” is not the “/” character, select the Date Separator box.
6. Select the “/” character from the drop-down list (or type it in using the on-screen keyboard).
7. Tap the “OK” buon at the top of the screen.