Need help?Do you have a question about the Datalogic Skorpio X4 and is the answer not in the manual?
General| Display diagonal | 3.2 \ |
|---|---|
| Display resolution | 240 x 320 pixels |
| Audio system | HD Audio |
| Flash memory | 8 GB |
| Internal memory | 1 GB |
| Internal memory type | RAM |
| Compatible memory cards | SDHC |
| Maximum memory card size | 32 GB |
| USB 2.0 ports quantity | 1 |
| Processor family | Instruments OMAP |
| Processor frequency | 1 GHz |
| Processor manufacturer | Texas Instruments |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Battery voltage | 3.7 V |
| Battery capacity | 3000 mAh |
| GPS (satellite) | No |
| RFID reader | - |
| Product color | Black |
| Keyboard layout | Numeric |
| Linear (1D) barcodes supported | GS1-128 (UCC/EAN-128), JAN, U.P.C. |
| International Protection (IP) code | IP64 |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code |
| Data network | Not supported |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Bluetooth version | 4.0 |
| Security algorithms | CCX v4 |
| Operating system installed | Android |
| Harmonized System (HS) code | 84713000 |
Weight and Dimensions| Depth | 76 mm |
|---|---|
| Width | 193 mm |
| Height | 156 mm |
| Weight | 482 g |
Step-by-step instructions for installing the battery pack.
Details on how to charge the device's battery using USB or dock.
Procedures for removing and replacing the battery pack.
Overview of the Control Panel and its applets for device settings.
How to configure scanner settings for barcode data capture.
Settings for notifications, good reads, and barcode text formatting.
Steps to set up Bluetooth pairing between devices and enable Bluetooth.
Utility for device configuration, firmware updates, and deployment.
Managing and configuring connected devices via DXU.
Automating device setup and provisioning using barcodes.
Setting up device lockdown configurations using SureLock and SureFox.
Configuring the Locked Web Browser environment for restricted usage.
Using metatags to control device behavior from web pages.
Configuring the Autostart program for automatic application execution and installation.
How to perform 1D and 2D barcode scanning with the device imager.
Essential safety guidelines for using the device and its components.
Information on power supply requirements and laser safety precautions.
To Next Page
