Need help?Do you have a question about the Datalogic MEMOR 20 and is the answer not in the manual?
General| Processor | Qualcomm Snapdragon 660 |
|---|---|
| NFC | Yes |
| Memory | 4 GB RAM, 32 GB Flash |
| Scanning | 1D/2D imager |
| Camera | 13 MP rear camera |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g/n/ac |
| Cellular | 4G LTE |
| Connectivity | USB |
Defines terms and symbols used throughout the manual for clarity.
Provides a general description of the Memor 20's features, performance, and ruggedness.
Details the wireless technologies supported by the Memor 20 for connectivity.
Lists the different Memor 20 models and their specific configurations.
Lists all the components included in the Memor 20 package.
Illustrates and labels the top side of the Memor 20 device.
Illustrates and labels the front side of the Memor 20 device.
Illustrates and labels the side views of the Memor 20 device.
Illustrates and labels the back side of the Memor 20 device.
Illustrates and labels the bottom side of the Memor 20 device.
Step-by-step instructions for inserting the battery pack into the device.
Instructions on how to charge the battery using USB or a dock.
Provides essential information about battery care, storage, and charging.
Crucial safety warnings and precautions for handling and using the battery pack.
Detailed instructions for installing nano SIM cards into the device.
Step-by-step guide to attach the light handstrap to the device.
Step-by-step guide to attach the full handstrap to the device.
Instructions on how to power on the Memor 20 device.
An overview of the device's home screen layout and its main components.
Explanation of common icons displayed in the device's status bar.
Describes how the device enters and exits suspend mode to save power.
Details the options available when the power button is long-pressed.
Procedure for safely swapping the battery pack without closing applications.
Overview of resetting device configurations to a default or enterprise status.
Resets all network settings on the device.
Resets application preferences such as notifications and default actions.
Resets the device to its original factory default configuration.
Resets the device to a user-defined enterprise configuration.
Explains how to activate Device Owner mode for Android Enterprise setup.
Introduction to the device's settings application and how to access it.
Accesses Datalogic-specific configurations for the device.
Configures power-saving features and suspend timeouts.
Procedures for updating the device's system software.
Configures Wi-Fi and Ethernet network connections.
Manages Bluetooth and NFC connections with other devices.
Configures the secondary display for notifications when the device is locked.
Adjusts touch-screen sensitivity for different finger types (bare/gloved).
Instructions on how to enter and use the device's recovery mode for system management.
Configures good read tones and display notifications for scanner feedback.
Enables and configures good read notifications (LED, Green Spot).
Allows formatting of barcode text with prefixes, suffixes, and separators.
Adds code identifiers as prefixes or suffixes to scanned barcode strings.
Customizes the Memor 20's scanning behavior and settings.
Enables or disables keyboard wedge and intent wedge functionality.
Customizes settings for specific barcode symbologies for decoding.
Advanced settings for barcode reading, including quiet zones and inverted decoding.
Provides detailed information about the device's scan engine.
Changes and persists symbology settings globally for the scanner.
Provides battery status, charging profiles, and data logging features.
Provides information about and management of the device's cradle.
Unified utility for device configuration and firmware updates via PC.
Configuration tool that uses special barcode labels for device setup.
Enables and configures the floating soft trigger functionality.
Sets the lapse of time for the SoftSpot to become transparent.
Configures applications to launch quickly via the SoftSpot.
Allows changing the SoftSpot's normal and decoded image options.
Enables continuous scanning by double-tapping the SoftSpot.
Secures and locks the device for responsible usage and productivity.
Creates a locked browsing environment for controlled web access.
Provides information on using USB for file transfer and ADB for device control.
Explains the SDK add-on library for extending Android SDK and development tools.
Information on Datalogic SDK APIs and their usage.
Standard for creating custom device features supported by enterprise mobility management.
Generates a QR code for automatic Wi-Fi network connection.
Details how the device imager captures and decodes barcode data.
Overview of connecting the device via USB for data transfer.
Steps to set up a reading system using a 3-slot dock and Ethernet.
Details the device's Wi-Fi capabilities and standards.
Explains MIMO technology for enhanced Wi-Fi throughput and coverage.
Information on WWAN connectivity, supported bands, and SIM card requirements.
Describes serial communication with Bluetooth devices.
Enables short-range wireless data transfer using NFC technology.
Presents detailed technical specifications of the Memor 20 device.
Covers safety, regulatory approvals, and environmental compliance.
Instructions for cleaning the device and docks with approved agents.
Guidelines for safe and ergonomic device usage to prevent injury.
Information on accessing support services and documentation via the Datalogic website.
Guidance on obtaining assistance from authorized Datalogic resellers.
Links to SDK help and the User's Manual for further information.
Details the warranty period for the device and its consumables.
Definitions for essential terms related to networking, scanning, and device operations.
To Next Page
