74
MEMOR™ 20
CONNECTIONS
USB CONNECTION
USB Direct Connection
You can use the provided USB Type-C cable to directly connect the Memor 20 to a host
computer and transfer data through the USB interface.
1. Turn on the Memor 20.
2. Turn on the host computer.
3. Connect the device to the host PC via USB cable.
4. Scroll down the notification bar, tap the charging notification and change to Trans-
fer files. The default data transfer is USB 3.1. Switch the Fast file transfers slider to
downgrade to USB 2.0.
5. The device is now visible in your PC as a USB disk. You can start the data transfer.
NOTE: Connection through the cable complies to USB 3.1 standard.
Host Computer
Memor 20
USB Type-C Cable
To Next Page
Loading...
