Datalogic MEMOR 20 User Manual

CONTENTS
USER’S MANUAL 47
If the network is secured, a dialog box appears requesting information relevant to
the network security protocol (e.g., password, key, or certificate). Enter the
required information, then tap Connect:
Add a Wi-Fi Network
1. Tap Settings > Network & Internet and verify that the Wi-Fi is turned on.
2. Tap Wi-Fi.
3. Tap Add network at the end of the available network list:
4. Enter the Network SSID (Wi-Fi network name). For secure Wi-Fi network connec-
tions, tap None under Security, and then select the type of security protocol
required from the pop-up menu (e.g., WEP, WPA/WPA2 PSK or 802.1xEAP). Enter
any additional security information required by the type of security protocol
selected.

Datalogic MEMOR 20 Specifications

General

Brand	Datalogic
Model	MEMOR 20
Category	Handhelds
Language	English