To Next PageTo Next Page
Need help?Do you have a question about the Datalogic Memor X3 and is the answer not in the manual?
General| Display Size | 2.4 inches |
|---|---|
| RAM | 256 MB |
| Processor | XScale PXA310 @ 806 MHz |
| Storage | 512 MB |
| Operating System | Windows CE 6.0 |
| Battery Capacity | 1430 mAh |
| Connectivity | Wi-Fi, Bluetooth v2.1 |
| Scanner | 2D Imager |
| Battery Options | Standard and High Capacity |
| Protection | IP54 |
| Drop Specification | Withstands drops from 1.2 meters |
| Operating Temperature | -10 to 50 °C |
| Storage Temperature | -20 to 70 °C |
Details the Datalogic Memor X3 mobile computer's features, processor, memory, OS, connectivity, and durability.
Explains how to charge the battery pack, including direct connection and cradle methods.
Step-by-step guide on how to replace the battery pack in the Memor X3.
Describes how to connect the Memor X3 to a host computer via USB cable.
Explains how to connect the Memor X3 to a network using its onboard Wi-Fi radio.
Explains how to turn on the Memor X3 and the initial startup process.
Guides on how to use the stylus for selection, input, and interaction on the touchscreen.
Introduces the data capture functionality and how to access its configuration.
Details how to perform data capture using the laser scanner.
Explains how to perform data capture using the imager scanner.
Describes the process for data capture using the linear imager.
Outlines methods for resetting the Memor X3 (Warm, Cold, Clean Boot).
Guides on configuring data capture settings and parameters.
Instructions for accessing and configuring wireless networking using Summit Client Utility (SCU).
