Datalogic Memor X3 User Manual

CONNECTIONS
21
3
3.3 RS232 CONNECTION
You can use a cable to directly connect the Memor X3 to a host computer to transfer
data through the RS232 interface:
Key:
A Host computer C Memor X3
B 94A051022 WIN-NET
(HRS ST40X-18S-CV)
The Single Slot Dock can be connected to the Host by means of a standard null
modem cable such as Datalogic 94A051020 CAB-427 for 9-pin connections.
Once the host computer has been turned on, insert the Memor X3 mobile computer
into the dock.
Key:
A Host Computer C Single Slot Dock
B 94A051020 CAB-427
RS232 Null Modem Cable
D Power Supply (only necessary for battery
charging)
∗
∗
In this case the power supply is only necessary for battery charging. Insert the power supply
plug into the power jack on the base of the cradle and attach the power supply to a power
outlet.
A
B
C
A
B
C
D

Datalogic Memor X3 Specifications

General

Display Size	2.4 inches
RAM	256 MB
Processor	XScale PXA310 @ 806 MHz
Storage	512 MB
Operating System	Windows CE 6.0
Battery Capacity	1430 mAh
Connectivity	Wi-Fi, Bluetooth v2.1
Scanner	2D Imager
Battery Options	Standard and High Capacity
Protection	IP54
Drop Specification	Withstands drops from 1.2 meters
Operating Temperature	-10 to 50 °C
Storage Temperature	-20 to 70 °C