USE AND FUNCTIONING
4.6 CONNECTING TO OTHER COMPUTERS
There is more than one way to connect the Memor X3 to a host PC running
Windows. Each requires specific connections in order to function properly.
4.6.1 Windows Mobile® Device Center
The desktop application Windows Mobile® Device Center gives you the ability to
synchronize information between a desktop computer and your Memor X3.
Synchronization compares the data on the Memor X3 with that on the desktop
computer and updates both with the most recent information.
Windows Mobile® Device Center can be downloaded from Microsoft website
www.microsoft.com. It is only compatible with Windows Vista and Windows 7; if you
run Windows XP or earlier, you have to download Microsoft ActiveSync.
You can establish a connection to your Memor X3 through the following interfaces:
− USB either directly or through the Single Dock
− RS232 either directly or through the Single Dock
− Bluetooth® (see par. 4.6.2)
To establish a partnership between the Memor X3 and a host PC, start Windows
Mobile® Device Center and follow the steps below:
1. Connect the Memor X3 to the host PC. Windows Mobile® Device Center
configures itself and then opens.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Center’s Home screen, click Set up your
device.
4. Select the information types that you want to synchronize, then click Next.
5. Enter a device name and click Set Up.
When you finish the setup wizard, Windows Mobile Device Center synchronizes the
mobile computer automatically.
The Memor X3 running Windows CE does not come equipped with
Microsoft Office Outlook or any other application that allows users to
view contact, calendar, e-mail, or task data. Users can view files
copied to the Memor X3 by WMDC's file synchronization feature.
NOTE
To Next Page
Loading...
Need help?
General
