Datalogic Memor X3 User Manual

1 MEMOR™ X3
42
4
4.4 STATUS INDICATORS
4.4.1 LED Status
The Memor X3 provides three different LEDs signaling the mobile computer status.
LED STATUS
Good Read and
General Purpose
(left side)
Green
Scanning LED is ON, showing a good
decode.
Red
Scanning LED is ON from the time the
user hits the scan button (Trigger) until
the bar code is decoded.
Keyboard Status
(center)
Off
Keyboard in primary mode.
Yellow solid
Yellow alternate key mode.
Blue solid
Blue alternate key mode
Pink
CapsLock enabled.
Charging Status
(right side)
Green
It is constant once the charging process
has been completed (full charge).
Red It is constant while charging.
Red Blinking
It blinks in case of charge fault.

Datalogic Memor X3 Specifications

General

Display Size	2.4 inches
RAM	256 MB
Processor	XScale PXA310 @ 806 MHz
Storage	512 MB
Operating System	Windows CE 6.0
Battery Capacity	1430 mAh
Connectivity	Wi-Fi, Bluetooth v2.1
Scanner	2D Imager
Battery Options	Standard and High Capacity
Protection	IP54
Drop Specification	Withstands drops from 1.2 meters
Operating Temperature	-10 to 50 °C
Storage Temperature	-20 to 70 °C