Datalogic Memor X3 - Removing the Microsd Card

1 MEMOR™ X3
8
1
1.5 REMOVING THE MICROSD CARD
To remove the microSD card, follow the steps above to access the SD area, and
remove it from its slot.
Follow proper ESD pr
ecautions to avoid damaging the
microprocessors in the Memor X3 or the microSD card itself.
Proper ESD precautions include, but are not limited to, working on
an ESD mat and ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the microSD card slot for any other accessories.
CAUTION