Datalogic Memor X3 User Manual

1 MEMOR™ X3
4
1
1.3 PACKAGE CONTENTS
The Memor X3 package contains:
− 1 Memor X3 mobile computer
− 1 AC/DC power supply
− 1 plug kit
− 1 standard Micro USB cable
− 1 hand strap with stylus holder (Windows CE Pro models only)
− 1 extensible stylus (Windows CE Pro models only)
− 1 guitar pick + cord
− 1 Quick Start Guide
− 1 Safety and Regulatory Addendum
− 1 Wavelink Avalanche Insert
− 1 End User License Agreement (EULA) Sheet
Remove all the components from their packaging; check their integrity and compare
them with the packing documents.
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
CAUTION
Rechargeable battery packs are not initially fully charged. Therefore
the first operation to perform is to charge them. See section 2.1.
NOTE

Datalogic Memor X3 Specifications

General

Display Size	2.4 inches
RAM	256 MB
Processor	XScale PXA310 @ 806 MHz
Storage	512 MB
Operating System	Windows CE 6.0
Battery Capacity	1430 mAh
Connectivity	Wi-Fi, Bluetooth v2.1
Scanner	2D Imager
Battery Options	Standard and High Capacity
Protection	IP54
Drop Specification	Withstands drops from 1.2 meters
Operating Temperature	-10 to 50 °C
Storage Temperature	-20 to 70 °C