Datalogic Memor X3 - Imager Data Capture

USE AND FUNCTIONING
33
4
4.2.2 Imager Data Capture
The Memor X3 Imager captures a picture of the entire bar code. The omni-directional
scanning does not require that the operator orient the bar code to align with the scan
pattern.
To read a 1D or 2D code, simply point the Memor X3 Imager model onto the code
and press the SCAN Key or the pistol trigger.
The Memor X3 Imager uses an intelligent aiming system pattern, indicating the field
of view, which should be positioned over the code:
Aiming System