Datalogic Skorpio X4 - Connections; Windows Mobile Device Center

User’s Manual 181
Connections
There is more than one way to connect the Skorpio X4 to a host PC
running Windows. Each requires specific connections in order to
function properly.
Windows Mobile® Device Center
The desktop application Windows Mobile® Device Center allows you
to synchronize information between a desktop computer and your
Skorpio X4. Synchronization compares the data on the Skorpio X4
with that on the desktop computer and updates both with the most
recent information.
Windows Mobile® Device Center can be downloaded from Microsoft
website www.microsoft.com. It is only compatible with Windows
Vista and Windows 7; if you run Windows XP or earlier, you have to
download Microsoft ActiveSync.
You can establish a connection to your Skorpio X4 through the
following interfaces:
• USB either directly or through the Single Dock.
• RS232 either directly or through the Single Dock.
•Bluetooth® (see Bluetooth® Manager Device Setup on
page 73)
To establish a partnership between the Skorpio X4 and a host PC,
start Windows Mobile® Device Center and follow the steps below:
1. Connect the Skorpio X4 to the host PC. Windows Mobile® Device
Center configures itself and then opens.