Dataman S4 - File Format

DATAMAN S4 MANUAL
68FUNC RCVE = Receive Library<$&FUNCRCVE>
changes are made to the stack or<MI>
<B>code.Regard the <$ITPA;Editing>TPA
as a "NO GO" area unless you are certain of what
you are doing. You
can recover from any changes by pressing the
RESET button and reloading
the LIBRARY ROM.<MI>
@COMPUTER TEXT = ADR=0E000 DATA
MAN <R>
4441 5441 4D41 4E20<R>
53B3 0838 3838 0C06<R>
0129 1267 0008 85F9.
FUNC RCVE = Receive
Library<$&FUNCRCVE>
@COMPUTER TEXT = <R>
>><R>
>><R>
>>RECEIVE LIBRARY
Receives a new library ROM into the TPA area.
This command is useful
if you download a new library from our Bulletin
Board to your computer. When
you have sent the file to S4 you can make a new
LIBRARY ROM with MAKELIB.
Your SETUP must be INTEL format for this
command to work.
FILE FORMAT<$&FILEFORMAT>
<R>