Dataprobe iBootBar - Page 16

iBootBar Page 16
ibootbar_v1.2x
User Commands Description
The following commands require administrative rights
get users
Returns a list of users.
add user <name>
Adds a new user. the new password is
automatically created to match the <name>
get user <name>
Returns user <name>’s rights and settings.
ren user <name> <newname>
Renames a user
del user <name>
Deletes a user.
set user <name> outlet <n/all> <yes/no>
Sets a user’s rights to control one or more
outlets.
set user <name> group <group name> <yes/no>
Sets a user’s rights to control one or more
groups.
set user <name> role <admin/user>
Sets a user’s administrator privileges.
set user <name> password <newpass> <confirm>
Sets a user’s password. (default is same as name)
set user <name> email <email address 64 char max>
Sets a users email address.
set user <name> sendmail <yes/no>
Enables or Disables a user’s receipt of email
notifications.
set user <name> pin <pin/0>
4-10 digits for DTMF control via modem. Each
user’s pin must be unique. set to 0 to clear dtmf
control.
Group Commands Description
get groups
Returns a list of groups
get group <name>
Returns a list of outlets in a group
set group <name> <on/off/cycle>
Sets a group’s name
The following commands require administrative rights
add group <name>
Adds a group
set group <name> outlet <n/all> <yes/no>
Adds or Deletes an outlet to a group
ren group <name> <newname>
Renames a group
del group <name>
Deletes a group