DataRemote DRI-9080 User Manual

Revision No. 005 August 2020
DataRemote 2020
WHAT CAN YOUR
NEW DEVICE DO?
Virtually every application that requires a copper
wire-line can now be replaced with one device!
DRI-9080
POTS IN a BOX ATA Appliance
INSTALLATION GUIDE
Page 1

DataRemote DRI-9080 Specifications

General

Brand	DataRemote
Model	DRI-9080
Category	Conference System
Language	English

Summary

HARDWARE INSTALLATION

INSTALLATION PREPARATION

DEVICE REAR PANEL OVERVIEW

BASIC INSTALLATION STEPS

Step-by-step guide for basic connection and setup of the device.

SERVICE TECHNICIAN INSTALLATION

OVERVIEW AND SCOPE OF WORK

PRE-INSTALLATION TASKS

PHASE 1 DEVICE ASSEMBLY & PRE-TEST

ASSEMBLE AND PRE-TEST DEVICE

Steps to assemble and prepare the DRI-9080 device for initial testing.

VERIFY WAN CONNECTIVITY

TEST VOICE LINES

Procedure for testing voice line functionality and LED status.

TEST FIRE PANEL CONNECTION

Steps to identify and prepare for testing the fire alarm panel connection.

PHASE 2 LOCATE POTS LINES

IDENTIFY FIRE ALARM POTS LINES

PHASE 3 CUT-OVER FIRE ALARM LINES

CUT-OVER LINES TO DRI-9080

Procedure for rerouting fire alarm panel lines to the new DataRemote device.

PHASE 4 FIRE ALARM COMMUNICATION TESTING

SECONDARY LINE TESTING PROCEDURE

Procedure for testing the secondary alarm line connection and communication.

PRIMARY LINE TESTING PROCEDURE

Procedure for testing the primary alarm line connection and communication.

FIRE PANEL COMMUNICATION CONFIRMATION

PHASE 5 FAX LINE TESTING

FAX TESTING PROCEDURE

Steps for conducting outbound and inbound fax tests.

PHASE 6 ANALOG DATA LINE TESTING

ANALOG DATA LINE TESTING

Procedure for testing analog data line connectivity and calls.

POST-INSTALLATION TASKS

DELIVERABLES