2. TOOLS REQUIRED
The following tools may be required to correctly install the system.
Please note that the list includes a voltmeter – Test lights and Test
Bulbs should not be used as an alternative.
Socket set and/or Spanners
Wire Strippers
Wire Cutters
Soldering Iron and Solder
Insulation Tape
Trim Tool
Small and Medium-Sized Philips Screwdrivers
Torx and Hex Drivers
Small and Medium Flat Blade Screwdrivers
Heat Gun or Similar
Electric Drill
Drill Bits – 2.5mm, 8mm
Voltmeter