EasyManua.ls Logo

Datatool system 3 - Rider Options; Siren Tone Selector; Arming Without Movement;Nudge Function; Arming;Disarming in Silent Mode

Datatool system 3
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 5
RIDER OPTION - Siren Tone Selector
You can choose one
of eight individual
siren tones.
The siren tone will be
subdued during the
selection process.
RIDER OPTION - Arming the system without Movement/Nudge Function
RIDER OPTION - Arming/Disarming the system in Silent Mode
The System can be programmed to arm with the movement/nudge function disarmed
(Ferry Mode). This is achieved by securely grounding the Yellow wire.
NOTE: If you arm the system manually with the transmitter (within 30 seconds of
turning the ignition off) the system will arm with movement/nudge function armed.
Movement/nudge detection can be switched ON/OFF at any time with the transmitter
when the system is armed.
The System can be programmed to
arm/disarm in silent mode. This is achieved by
securely grounding the white wire.

Related product manuals