Datatool system 3 - Hazard Warning Lights Function; Entering Hazard Warning Lights Mode; Switching Off Hazard Warning Lights; Sleep Mode

Page 4
HAZARD WARNING LIGHTS
A hazard warning lights function is included.
To switch off the hazard warning lights,
but leave the system armed, press
both buttons together for 3 seconds.
To switch off the hazard warning lights,
and disarm the system, press the
round button.
NOTE:
When entering Hazard Warning Lights Mode,
the hazard warning lights flash 5 times then
stop. The motorcycle battery is too low to
maintain this mode.
SLEEP MODE
If the level of charge in your motorcycle battery drops, the system will go into Sleep
Mode conserving remaining power.
NOTE: If the system does not come out of sleep mode in the normal way, hold the
transmitter button down, at the same time turn on the ignition.