Datavideo DN-60 - System Control Command Details; Device Type and Bin Commands

35
System Control
00h, 11h Device Type request
The response is 00, 00 indicating QuickCapture
00h, F1h Next Bin
When this command is issued from the Idle state the next bin is selected. If the
present bin is 99 then the next bin is 1.
00h, F2h Previous Bin
When this command is issued from the Idle state the previous bin is selected. If the
present bin is 1 then the next bin is 99.
00h, F4h Disable Loop Play
When this command is issued from the Idle state the Loop Play feature is disabled.
Loop Play is where the the last play command is repeated from its beginning when
the end is reached.
00h, F4h Enable Loop Play
When this command is issued from the Idle state the Loop Play feature is enabled.
Loop Play is where the the last play command is repeated from its beginning when
the end is reached.
01h, F0h, XXh Select Bin XX
When this command is issued from the Idle state bin XX is selected. XX varies
between 1 and 99. Illegal bins are ignored.
01h, F3h, XXh Select and Empty Bin XX
When this command is issued from the Idle state bin XX is selected and all of its
content is permanently deleted. XX varies between 1 and 99. Illegal bins are
ignored.