36
Transport Control
20h, 00h, Stop
The unit enters the idle state. In the A2D, the outputs reflect the video source as
selected by the Front Panel.
20h, 01h Play
Content of the present bin is played at 1x speed. This command may be issued
from the idle state or any other Play state.
20h 02h Record
The video is recorded from the selected source onto the current Bin. This command
may be issued only from the idle state.
20h, 10h Fast Forward
A play state where video is played at the highest speed of 32x in the forward
direction.
20h, 20h Fast Rewind
A play state where video is played at the highest speed of 32x in the reverse
direction.
NOTE: When receiving one of the following commands (JOG, VARIABLE or
SHUTTLE ), the unit will play forward or backward according to the speed data. The
first data byte may only be a maximum of 80:
Play Speed=10
(nn/32-2)
Note that setting nn to 0 will result in pausing the unit.
21h, 11h, nnh Jog Forward
21h, 12h, nnh Variable Forward
21h, 13h, nnh Shuttle Forward
A Play state where video is played at the commanded play speed as described
above in the forward direction. Note: Setting the speed to 0 causes the play to
pause.
21h, 21h, nnh Jog Reverse
21h, 22h, nnh Variable Reverse
21h, 23h, nnh Shuttle Reverse
A Play state where video is played at the commanded play speed as described
above in the reverse direction. Note: Setting the speed to 0 causes the play to
pause.
21h, F0h, nnh Select Bin and Play
Content of the bin number nn is played at 1x speed from the beginning. This
command may be issued from the Idle state or any other Play state.
To Next Page
Loading...
