Need help?Do you have a question about the Datavideo NVS-33 and is the answer not in the manual?
Highlights the NVS-33's main capabilities, including simultaneous streaming and recording.
Lists specific features like supported bitrates, audio inputs, and streaming protocols like RTMP, RTSP.
Details the physical controls and ports on the front of the NVS-33, including buttons and indicators.
Covers rear panel interfaces like RCA audio input, SDI/HDMI video inputs, LAN port, and power connector.
Describes the function of the INPUT button for source selection and its LED indicator behavior.
Explains how to adjust video bitrate modes (H/M/L) using the BITRATE button.
Provides steps to activate and stop the simultaneous recording and streaming mode.
Details how to activate and stop the recording-only mode.
Explains how to activate and stop the streaming-only mode.
Details network connection procedures, IP address acquisition, and device search using utility software.
Explains how to access and navigate the NVS-33's web UI for configuration and monitoring.
Covers enabling the CG function, setting text, position, and size for on-screen text overlays.
Explains various system settings including network, time, firmware, and account management.
Guides users on using the file repair function for damaged MP4 recordings.
Covers customizing operation modes and streaming video using various protocols like RTSP, TS, HLS, and SRT.
To Next Page
General