Datavideo PD-4A - Product Specifications; Technical Specifications

10
Datavideo Product Voltage Requirements
This table is a guideline for Datavideo products; if you are using products from other
manufacturers, please check their voltage requirements carefully before connecting to the PD-
4A.
DC 12V 3A BAC-03, VP-332, DAC-15, DAC-10, DAC-6, DAC-5, TLM-70D, TLM-404,
TLM-702, TLM-350, SE-500, DVK-100, RMC-140, ITC-100, STC-100, DN-
100, CP-100, DAC-30, CKL-100, TLM-700, TLM-433
DC 12V 5A DN-300, TLM-170MD
DC 12V10A SE-1000, SE-2000, SE-3000, SE-900, SE-800, MP-6000
Specifications
Input
AC input outlet
Two AC input with Power switch
AC input current rating
100 - 240VAC
AC input fuse rating
100 – 240VAC MAX 6.3A
AC frequency
50Hz or 60Hz
DC input
One DC 12V, supports non-regulated DC 12V output
DC input watt
300W
Output
DC Output
12V±5%, 5A XLR AC Female Jack x 3
12V±5%, 10A XLR DC Female Jack x 2
(Two of the outputs can combine the rating become one
12V±5%, 10A DC outputs)
Sequential-On design of each DC output terminal during
power on stage by 1 second duration.
General
Output Efficiency
More than 80%
DC Output Noise
+5%, -3%
Operating Temperature
0 to 40 ℃ ambient
Operating Humidity
5% to 90% RH, Non-condensing
Storage Temperature
-20 to 85 degrees C
Storage Humidity
5% to 90% RH, Non-condensing
Size
440*44*330mm (W*H*D)
Weight
6.2Kg
AC overload protection
Non-recovery fuse on the AC input outlet
DC overload protection
Auto-recovery fuse on each DC output terminal