Datavideo RMC-2 User Manual

16
4. How to use RMC-2 to Control your Camera
Datavideo RMC-2 provides four sections including “CAMERA”, “PRESET”,
“SPEED” and joystick for you to control your PTZ cameras.
 CAMERA: If you have more than one camera and those cameras are
connected to Datavideo iCAST 10NDI and controlled by TPC-700 or TPC-
700P’s ZR-1 app. You can use the CAM1, CAM2 or CAM3 button in this
area to select the camera that you want to control.
 PRESET: When the PRESET positions are set in advance within the iCAST
MINI or the ZR-1 app within the TPC-700 series, you can use the Preset 1
to 4 buttons to recall your desired preset positions.
 SPEED: This option allows you to adjust the Pan and Tilt speeds of your
camera. There are three speed levels including “FAST”, “MID” and
“SLOW” for you to select.
 Joystick: This joystick allows you to adjust the Zoom In/Zoom Out of the
camera. For Zooming Out, please rotate the joystick to the left side. For
Zooming In, please rotate the joystick to the right side.

Datavideo RMC-2 Specifications

General

Brand	Datavideo
Model	RMC-2
Category	Controller
Language	English