Datavideo TLM-170P User Manual

9
Rear Panel
LAN Remote Control: Use a crossover Ethernet cable for direct connection between TLM-170P and the PC RJ-45 port.
See Remote Control Setup section for more details.
USB 2.0 Port - For firmware updates only. See Firmware Update section for more details.
SDI Input & Loop Through: BNC Input for HD / SD SDI with a loop through output.
HDMI Input - Video and Audio input from HDMI.
3.5mm Tally Light Input: Tally light information can be supplied to the TLM-170P from the Datavideo
RMC-140, TB-5 or TB-10 or the ITC-100SL / ITC-200B/E via this socket.
Analog Audio Inputs: Mono audio inputs to correspond to the analogue video inputs (CV 1 & CV 2).
Composite Video Inputs 1 & 2: BNC connectors for composite video with one loop through output.
Component Video Input: BNC connectors for Component (YUV (Y/R-Y/B-Y)) Video.
External Speaker Output Connections: Speaker Output connections Max 5v p - p (2w)
DC In Socket: 2.1mm, In Line Power Socket with screw lock, for connecting the suitable 12v 30W feed.
On / Off Switch: Main on / off switch, switches the TLM-170P on and off.

Datavideo TLM-170P Specifications

General

Brand	Datavideo
Model	TLM-170P
Category	Monitor
Language	English