FP-550F 27
- “NON-FISCAL RECEIPT” is printed in expanded style - if printer is fiscalized the
text is “OFFICIAL RECEIPT”.
The response contains “Allreceipt”.
If the S1.1 flag is raised the command is not executed because there is no opened non-
fiscal receipt.
2Ah (42) PRINTING OF A FREE NON-FISCAL TEXT
Data field: Text
Response: None
Text A text of 28 symbols (at most) The symbols after 28 are cut off.
If S1.1 is raised there is no non-fiscal receipt opened and the text is not printed.
2Bh (43) SETTING HEADER, FOOTERS AND PRINTING OPTIONS
Data field: <Item> <Text>
Response: Entries from the data field
HEADER consists of 6 lines of text, which are printed at the beginning of each fiscal
and non-fiscal receipt. The printer will function normally only when at least two “header”
lines have been programmed for printing.
FOOTER consists of 2 lines of text printed at the end of each receipt.
HEADER and FOOTER are automatically center aligned.
Item One symbol having the following meaning:
“0” to “7” is the sequence number of the set line the Header lines being numbered from
0 to 5 and those of the Footer - 6 and 7.
“P” Setting printing options
“C” Permission/rejection of the automatic cutting of the paper after each receipt.
After switch ON the performance of the printer is defined in accordance with the
setting of the switch SW1.
“L” Permission/rejection of the printing of the graphic logo immediately before the
Header. This logo is defined with the command (115).
“A” Automatic formatting of a sales invoice.
“I” Gives us the option to read the values, set earlier with command 43. After the
letter “I” only one more symbol follows which coincides with some of the above.
Text A text of 36 symbols, where:
If <Item> is a digit from “0” to “7” - the text of the respective line.
If <Item> =”P” - 4 symbols “0” or “1” where “0” cancels and “1” permits the respec-
tive option. In the order of the symbols, these options are:
[1] An empty line is printed after the HEADER
[2] An empty line is printed after the tax number
[3] An empty line is printed after the FOOTER
[4] A division line is printed before the total sum.
If <Item> = `L’ - One symbol with possible values ‘0’ or ‘1’, which permit the printing
of the first and the second line of the graphic logo.
To Next Page
Loading...
