Datecs FP-550F - Page 36

36 FP-550F
‘2’ A daily report without closure is generated, i.e, no entry into the fiscal memory
is made and no closures are performed. The printout ends with the inscription “INTE-
RIOR RECEIPT” and the contents of the interior registries for debit and credit are not
printed.
‘3’ A daily report without closure is generated i.e, no entry into the fiscal memory is
made and no closures are performed. The printout ends with the inscription “INTE-
RIOR RECEIPT” and the contents of the interior registries for debit and credit are
printed out. The same actions may be generated directly from the printer if during
switch ON the left button is pressed down.
N The presence of this symbol at the end of the data cancels the option to clear the
data accumulated on the operators during a report with clear.
FM_Total The sum of all sales without VAT (under tax group ‘’) - 12 bytes with a
sign. Not used in Bulgaria and would normally be 0.
TotalX The sums under all tax categories - A, B, C and D - 12 bytes with a sign.
46h (70) INTERNAL DEBITING AND CREDITING (serveIn and Out)
Data field: [<Amount>]
Response: ExitCode, CashSum, ServIn, ServOut
Amount: The sum which will be registered (up to 9 bytes). Depending on the sign
of the digit this sum is interpreted either as credit or debit (serveIn or serveOut).
ExitCode
‘P’ The order has been completed. If the ordered sum is not 0 the printer
will print an interior receipt for registering the operation.
‘F’ The order has been canceled. This happens if:
- The cash sum available is less than the ordered interior credit (servIn),
- There is an opened fiscal and non-fiscal receipt.
CashSum Available cash. Apart from this command the sum grows after each payment
in cash.
ServIn The sum from all commands “Interior credit” (serveIn)
ServeOut The sum from all commands “Interior debit” (servOut)
Changes the content of the cash availability register. Depending on the sign of the sum
in question it is accumulated in the register for interior debit-credit. The information is
not saved in the fiscal memory of the device and is accessible until the performance of
the daily closure. It is printed out at the command 69 (45h) and at the generation of the
daily report without closure from the printer itself. At the successful completion of this
command the drawer “kick-out” function is automatically activated.
47h (71) PRINTING DIAGNOSTIC INFORMATION
Data field: No data
Response: None
The command initiates the generation of an interior receipt containing diagnostic
information as follows:
- Prints the date and the version of the employed software,
- Prints the control sum of the employed firmware,